How to Enter and Manage a Corrective Action Plan (CAP)

How to Enter and Manage a Corrective Action Plan (CAP)

A Corrective Action Plan (CAP) is used to document and manage the actions required to address non-conformances identified during an RBA assessment.

This article explains how to enter and manage a CAP, understand the CAP status, determine who is responsible for the next action, identify dependencies that must be completed before the CAP can progress, submit supporting evidence, and troubleshoot common CAP issues.

Important: Your CAP status tells you where the CAP is in the process and who is expected to act next. If you cannot edit or progress a CAP, check the current status before assuming there is a technical issue.

On this page

Quick Help

If you are looking for an answer to a specific CAP question, use the links below:


1. Before You Begin

Before entering or updating a CAP, confirm that:

  • You are working with the correct assessment and finding.
  • You are associated with the correct facility or company.
  • You have the appropriate role and permissions.
  • The CAP is currently at a status that allows you to take action.
  • You have the required CAP information and supporting documentation available.
  • You understand any applicable CAP due dates or assessment requirements.

If a CAP has already been submitted and is awaiting review or approval, editing may intentionally be restricted until the responsible reviewer completes the next action.

Before troubleshooting: Check the current CAP status first. A CAP that appears "locked" may simply be waiting for action from another party.

↑ Back to top


2. What Information Should Be Included in a CAP?

A complete CAP should clearly document the information required to understand why the finding occurred and how the issue will be corrected and prevented from recurring.

Depending on the applicable CAP process, this may include:

  • Root cause: Why did the non-conformance occur?
  • Containment action: What immediate action was taken to control or limit the issue?
  • Corrective action: What will be done to correct the underlying issue?
  • Preventive action: What will prevent the issue from recurring?
  • Expected completion date: When will the required actions be completed?
  • Supporting evidence: What evidence demonstrates that the actions have been implemented?
Tip: The CAP should make it clear what happened, why the issue occurred, what is being done about it, who is responsible, and how successful completion will be demonstrated.

↑ Back to top


3. Understanding CAP Roles

CAP responsibilities change as the CAP moves through the workflow. Understanding who is expected to act can help determine whether you need to take action or wait for another party.

Auditee / Reviewee

Responsible for developing the CAP, completing the required analysis, responding to revision requests, implementing corrective actions, and providing supporting evidence.

CAP Manager / Reviewer

Responsible for reviewing submitted plans, root-cause analysis, containment actions, corrective actions, and evidence and determining whether the CAP can progress or requires additional work.

Closure Reviewer / Auditor

Where applicable, responsible for performing or supporting final verification before the CAP can be formally closed.

Remember: Not every CAP status requires action from the Auditee/Reviewee. Some statuses mean the CAP is waiting for review, approval, verification, or a closure activity.

↑ Back to top


4. Understanding Your CAP Status

The CAP status identifies where the CAP currently sits in the workflow. The status can also help determine what must happen before the CAP progresses and which party is expected to act.

Use the table below to answer five questions:

  1. Where is my CAP?
  2. What had to happen before this status?
  3. Who acts next?
  4. What does the status mean?
  5. What should happen next?
CAP Status Dependencies / What Must Happen First Who Acts What It Means Next Action
Plan Initiated The CAP/finding is available for action. Auditee / Reviewee CAP development has started. Complete the required CAP plan information and prepare it for submission.
Plan Submitted for Approval Required plan information has been completed and submitted. CAP Manager / Reviewer The CAP plan is awaiting review. Review the plan and either approve it or return it for revision.
Plan Needs Revision The submitted plan has been reviewed and changes are required. Auditee / Reviewee The CAP plan needs changes before it can progress. Review the feedback, revise the plan, and resubmit it.
Plan Approved / Actions underway The CAP plan has been reviewed and approved. Auditee / Reviewee The CAP plan is approved and implementation can proceed. Carry out the approved actions and document implementation and evidence.
Root Cause Analysis Submitted for Approval Root cause analysis has been completed and submitted. CAP Manager / Reviewer The root cause analysis is awaiting review. Review and approve the analysis or request revisions.
Root Cause Analysis Needs Revisions The root cause analysis has been reviewed and improvement is required. Auditee / Reviewee The analysis does not yet meet requirements. Address the reviewer's feedback and resubmit the root cause analysis.
Containment Action Submitted for Approval The containment action has been documented and submitted. CAP Manager / Reviewer The immediate containment action is awaiting review. Review the containment action and approve it or request revisions.
Containment Action Needs Revisions The containment action has been reviewed and changes are required. Auditee / Reviewee The containment action requires additional or corrected information. Review the feedback, revise the containment action, and resubmit it.
Containment Action Approved The containment action has been reviewed and accepted. Auditee / Reviewee The immediate containment response has been accepted. Continue with the remaining root-cause and corrective-action requirements, as applicable.
Corrective Action Submitted for Approval The corrective action has been developed and submitted. CAP Manager / Reviewer The corrective action is awaiting review. Review the corrective action and approve it or request additional work.
Further Action Required The submitted corrective action has been reviewed and additional work is required. Auditee / Reviewee The CAP cannot progress until additional corrective work is completed. Review the feedback, complete the required work, and resubmit.
Plan Approved Actions Underway The required plan/actions have been approved. Auditee / Reviewee Approved corrective actions are being implemented. Complete the required actions and gather objective evidence demonstrating implementation.
Evidence Submitted for Approval Corrective action has been completed and supporting evidence submitted. CAP Manager / Reviewer Supporting evidence is awaiting verification. Review the evidence and determine whether it adequately demonstrates completion.
Actions Submitted for Approval Required corrective actions have been completed and submitted. CAP Manager / Reviewer Completed CAP actions are awaiting verification. Review the submitted actions and evidence and approve them or request additional information.
Further Evidence Required Submitted evidence has been reviewed and is not sufficient to demonstrate completion. Auditee / Reviewee Additional supporting evidence is required. Provide the requested evidence and resubmit it for review.
Actions Completed / Eligible for Closure Audit Corrective actions and required evidence have been accepted. Authorized Closure Reviewer / Audit Process CAP implementation has progressed to the applicable closure-verification stage. Complete the required closure audit or other applicable final verification process.
Closed Required implementation, evidence, and applicable closure verification have been completed. No routine action The CAP lifecycle is complete. Retain the appropriate records and take further action only if subsequently required.
Important: Do not create a new CAP simply because the existing CAP is awaiting review, requires revision, or appears locked. Check the current status and responsible party first.

↑ Back to top


5. CAP Lifecycle at a Glance

Finding Identified → CAP Initiated → Plan Submitted → Review → Actions Implemented → Evidence Submitted → Verification → Closure

Not every CAP follows a straight path from initiation to closure. A CAP may return to an earlier stage when additional information, revision, corrective action, or evidence is required.

Typical Planning Cycle

Plan Initiated → Plan Submitted for Approval → Plan Approved / Actions Underway

or, where revisions are required:

Plan Submitted for Approval → Plan Needs Revision → Update → Resubmit

Typical Corrective-Action Cycle

Corrective Action Submitted for Approval → Approval / Progression

or:

Corrective Action Submitted for Approval → Further Action Required → Update → Resubmit

Typical Evidence Cycle

Evidence Submitted for Approval → Evidence Accepted → Closure Process

or:

Evidence Submitted for Approval → Further Evidence Required → Additional Evidence → Resubmit

↑ Back to top


6. What Should I Do If Revisions Are Requested?

Revision-related CAP statuses include:

  • Plan Needs Revision
  • Root Cause Analysis Needs Revisions
  • Containment Action Needs Revisions
  • Further Action Required
  • Further Evidence Required

If your CAP enters one of these statuses:

  1. Review the feedback provided by the reviewer.
  2. Identify the specific gap in the plan, analysis, action, or evidence.
  3. Update the appropriate CAP section.
  4. Confirm that all requested changes have been addressed.
  5. Resubmit the CAP, action, or evidence for review.
Do not create a duplicate CAP. If revisions have been requested, update the existing CAP unless you have specifically been instructed otherwise.

↑ Back to top


7. Submitting CAP Evidence

Supporting evidence demonstrates that the required corrective actions have been implemented.

Depending on the corrective action, evidence may include:

  • Updated policies, procedures, or documented processes
  • Training materials or training completion records
  • Implementation records
  • Photographs or other supporting documentation
  • System records
  • Updated forms or controls
  • Other objective evidence relevant to the corrective action

I Uploaded Evidence. Why Didn't the CAP Move to the Next Step?

Uploading a file does not necessarily complete the submission process.

If the status does not change after uploading evidence:

  1. Confirm that the document uploaded successfully.
  2. Confirm that you completed the applicable Submit action.
  3. Check the current CAP status.
  4. Determine who is expected to act next.
  5. Check for any additional required information.
  6. Review any system or validation messages.
  7. Contact RBA Support if the expected workflow still does not occur.

↑ Back to top


8. Why Can't I Edit My CAP?

A CAP may not be editable because:

  • The CAP has already been submitted and is awaiting review.
  • The current status does not permit editing.
  • Another party is expected to act next.
  • Your account does not have the necessary permissions.
  • Your account is associated with the wrong facility, company, or assessment.
  • The CAP has reached a stage where editing is intentionally restricted.

What should I check first?

  1. Check the CAP status.
  2. Use the CAP Status table to identify who acts next.
  3. Confirm that the required dependency has been completed.
  4. Confirm that you are using the correct account and facility.
  5. Confirm that the CAP is associated with the expected assessment and finding.
Important: A CAP that is unavailable for editing is not necessarily experiencing a technical problem. Editing may be intentionally restricted by the workflow.

↑ Back to top


9. Understanding CAP Status vs. Finding Status

A CAP workflow status describes where the Corrective Action Plan is in its lifecycle.

The underlying finding or non-conformance may separately have a verification status such as:

  • Open
  • Partially Open
  • Closed

These statuses should not automatically be interpreted as the same thing.

For example, a CAP may have progressed significantly through the corrective-action workflow while the underlying finding remains open pending final verification.

↑ Back to top


10. Can I Reopen a CAP?

Do not assume that a submitted, closed, or otherwise restricted CAP can simply be reopened by changing its status.

The ability to reopen or modify CAP activity may depend on:

  • The current CAP status
  • The applicable CAP workflow
  • Your role and permissions
  • The related assessment and finding
  • Applicable program requirements
  • Whether additional review or authorization is required

If additional information becomes available after the CAP reaches a restricted status:

  1. Check the current CAP status.
  2. Review whether an existing discussion, comment, or evidence option is available.
  3. Do not create a duplicate CAP unless specifically instructed.
  4. Contact the appropriate CAP Manager, reviewer, or RBA Support if further action is required.

↑ Back to top


11. What Should I Do If My CAP Is Overdue?

If the CAP or supporting evidence is overdue:

  • Review the outstanding finding and CAP requirements.
  • Check the current CAP status.
  • Complete outstanding corrective actions as soon as possible.
  • Upload any required supporting evidence.
  • Respond to outstanding reviewer requests.
  • Check whether additional approval or program action is required.
  • Contact the appropriate support or program team when guidance is required.
Do not wait for the status to change automatically. If the CAP requires action from you, complete the outstanding requirement and submit it through the applicable CAP workflow.

↑ Back to top


12. When Should I Contact RBA Support?

Contact RBA Support when the CAP workflow does not behave as expected after you have confirmed the current status, required dependency, and responsible party.

Examples include:

  • You cannot access the applicable assessment or CAP.
  • The CAP should be editable based on its status but remains unavailable for editing.
  • You cannot submit required CAP information.
  • You cannot upload required evidence.
  • The CAP status does not change after completing the required submission.
  • An error message prevents completion of the required action.
  • Your facility, company, assessment, or finding does not appear as expected.
  • You need assistance identifying the correct support path.

Information to Provide With Your Request

Providing complete information with the initial request can significantly reduce investigation and resolution time.

Please include:

  • Assessment/Audit ID
  • Finding ID or question number
  • Facility/company
  • Current CAP status
  • Your role in the CAP process
  • Expected action
  • What happens instead
  • Screenshot of the issue
  • Exact error message, if applicable
  • Steps already attempted
For faster support: Include the Assessment/Audit ID, Finding ID, facility/company, current CAP status, screenshot, and exact error message whenever available.

↑ Back to top


13. Important CAP Guidance

CAP requirements may vary depending on the applicable assessment program, finding type, CAP workflow, management approach, and required verification process.

Always follow the requirements and timelines applicable to the specific assessment.

RBA Support can assist with areas such as:

  • Access and account issues
  • Platform navigation
  • CAP workflow questions
  • Standard troubleshooting
  • Understanding where a CAP currently sits in the workflow
  • Routing the request to the appropriate support or program team

Questions requiring formal interpretation, CAP approval, finding disposition, controlled-record changes, or other authoritative program decisions may need to be handled by the appropriate CAP reviewer, auditor, program authority, or other authorized party.

↑ Back to top


Quick Reference: What Should I Do Next?

If you are unsure what to do, start here:

  1. Check the current CAP status.
  2. Find the status in the CAP Status table.
  3. Check the dependency. Has the required prior action been completed?
  4. Check who acts next.
  5. Complete the required next action or wait for the responsible party.

If the status requires action from you

Review any comments or requested revisions, complete the required work, verify that all required information is present, and submit the CAP, action, or evidence through the applicable workflow.

If the status requires action from a reviewer

No additional action may be required from you until the review has been completed. Monitor the CAP for the next status or reviewer feedback.

If the workflow does not behave as expected

Confirm the status, dependency, role, facility, assessment, and finding. If the issue remains, gather the information listed in When Should I Contact RBA Support? and submit a support request.

The simplest way to understand a CAP:

Status → Dependency → Who Acts → Required Action → Next Stage

↑ Back to top