Understanding the VAP Scoping Agreement (SA): Payers, Signatures, and Next Steps
Table of Contents
The Scoping Agreement (SA) is an important step in the Validated Assessment Program (VAP) process. It confirms the final assessment arrangements before the assessment proceeds, including the scope, cost, scheduled date (s), assigned assessment firm, and payer information.
Depending on who pays for the assessment, the document may appear as Attachment C or Attachment D.
In brief: The Scoping Agreement is the workflow stage in RBA Online. Attachment C or Attachment D is the applicable costing-approval document generated according to the payer arrangement.
What does the Scoping Agreement confirm?
The Scoping Agreement is the final contractual document that confirms key assessment arrangements before the assessment moves forward.
The agreement may include or confirm:
- Facility and auditee information
- Assessment scope
- Scheduled assessment date or dates
- Assigned assessment firm
- Assessment cost
- Payer organization
- Payer contact information
- Required signatories
Review before signing: Do not sign the agreement until you have confirmed that the facility, scope, assessment dates, cost, assessment firm, payer, and signatory information are correct.
Where does the SA fit in the VAP process?

The Scoping Agreement is not issued when an assessment is first requested. It becomes relevant after earlier contracting, scoping, and bidding activities are complete.

- The assessment is initiated or requested.
- Contracting is completed.
- An Assessment Program Manager is assigned.
- The assessment scope is completed.
- Bidding is initiated.
- Assessment firms submit bids.
- The applicable bid is accepted.
- The Scoping Agreement is prepared and issued.
- The required auditee and payer actions are completed.
- The agreement is countersigned.
- The assessment proceeds to the next applicable stage.
Recorded SA workflow

SA to Auditee for Signature → SA to Payer for Signature → SA Signed by Payer → SA Countersigned
If you receive a task asking you to review, initial, or sign the SA, the assessment has already completed several preceding VAP stages.
The applicable SA actions must be completed before the assessment can continue through the next applicable stages.
Why does the payer matter?
The audit payer is the organization responsible for the assessment cost.
The recorded payer may be:
- The auditee
- A requesting RBA member company
- Another organization or third party
The organization receiving the assessment and the organization paying for the assessment are not always the same organization.
The payer selection can determine:
- Which organization receives the agreement for approval
- Which payer contact receives the signature request
- Whether Attachment C or Attachment D applies
- Which party accepts responsibility for the assessment cost
- The sequence in which the auditee and payer must act
Incorrect payer information: Do not complete the payer signature if the payer or payer contact is incorrect. Request assistance before signing so the VAP team can determine whether the agreement needs to be corrected or reissued.
Attachment C versus Attachment D
RBA Online refers to the workflow as the SA or Scoping Agreement. However, the downloaded agreement may be labeled Attachment C or Attachment D.
| Document | Purpose | Typical payer arrangement |
|---|---|---|
| Attachment C | Validated Assessment Costing Approval | Generally used when the auditee is responsible for paying for the assessment |
| Attachment D | Third-Party Payer Validated Assessment Costing Approval | Generally used when a requesting company or another third party is paying |
Easy way to remember: SA is the workflow stage. Attachment C or Attachment D is the applicable costing-approval document based on the payer arrangement.
Who needs to act?
The required action depends on whether the auditee is also the payer or whether a different organization is paying for the assessment.
When the auditee is also the payer
The auditee reviews the assessment details and completes the applicable signature requirements as both the auditee and payer.
When the payer is a different organization
Both the auditee and the third-party payer may have actions to complete.
- The auditee reviews and confirms the proposed assessment information and completes the required auditee action.
- The payer reviews and accepts the applicable assessment cost and completes the required payer signature.
- The Assessment Program Manager manages the applicable VAP workflow and completes the countersignature stage.
Important for third-party payer assessments
Receiving an SA task does not necessarily mean that you should sign every signature field. If the facility is not paying for the assessment, the auditee should complete only the applicable confirmation or initialing requirement and should not sign the payer section unless instructed to do so.
What should I check before signing?
Before completing any signature or initial, confirm the following:
- The correct facility and auditee are shown.
- The assessment scope is correct.
- The proposed assessment dates are correct.
- The correct assessment firm is listed.
- The assessment cost is correct.
- The correct payer organization is shown.
- The payer contact information is accurate.
- You are completing the correct auditee or payer section.
- You are reviewing the most recent version of the agreement.
If information is incorrect
- Do not sign the agreement.
- Record the Audit ID.
- Identify the incorrect information.
- Explain what the correct information should be.
- Contact the RBA Help Desk or your applicable VAP contact.
- Wait for confirmation before taking further action.
If assessment information changes after the SA is issued, a revised agreement may replace the earlier version. A signature completed on a previous version may no longer satisfy the current requirement.
How do I sign the Scoping Agreement?

RBA Online supports electronic and manual signing methods.
Option 1: Sign electronically
- Sign in to RBA Online using your authorized account.
- Locate the pending SA task on your dashboard.
- Select the applicable Audit ID.
- Open the SA section.
- Select the electronic-signature option.
- Review all agreement details.
- Complete the required signature or initial fields.
- Select Finish or Submit, as displayed.
Option 2: Sign manually
- Sign in to RBA Online using your authorized account.
- Open the applicable assessment.
- Navigate to the SA section.
- Select the manual-signature option.
- Download the applicable agreement.
- Review all information carefully.
- Complete the required signatures or initials.
- Return to the SA section in RBA Online.
- Upload the completed PDF in the designated area.
- Select Submit to complete your action.
Manual submission requirement: Keep the uploaded PDF unlocked. Do not apply a password, encryption, or editing restriction that could prevent the RBA countersignature from being added.
What happens after signing?
Completing your action does not always mean that the entire SA process is complete. Another organization or role may still need to act.
- The auditee completes the applicable confirmation or signature.
- The payer completes the applicable payer signature.
- The signed agreement is returned for countersignature.
- The Assessment Program Manager completes the countersignature stage.
- The assessment proceeds to the next applicable VAP stage.
Expected result: When all required actions are complete, the SA status should progress to countersigned and the assessment can continue through the VAP process.
If your task is complete but the SA still appears pending, check whether the workflow is waiting for the auditee, payer, or countersignature.
Does signing mean payment is complete?
No.
Signing the SA confirms acceptance of the applicable assessment arrangements and costing information. It does not necessarily confirm that payment has been made or that the payer's internal purchasing process is complete.
After signing, the payer may still need to:
- Create or approve a purchase order
- Complete internal procurement requirements
- Request or process an invoice
- Confirm billing information
- Coordinate banking or payment details
- Complete payment through the applicable finance process
Service distinction: Questions about SA access, signatures, payer routing, or workflow status are VAP process or system-support questions. Questions about invoices, banking details, payment status, or purchase orders may need to be routed to the appropriate finance team.
Troubleshooting common issues
I do not see an SA task
Confirm that you are signed in with the correct account and viewing the correct assessment. The SA is issued only after the preceding VAP stages, including scoping, bidding, and bid acceptance, have been completed.
If you believe the assessment should already be at the SA stage, contact the RBA Help Desk and provide the Audit ID.
The wrong payer is shown
Do not sign the payer section. Contact support and provide:
- Audit ID
- Facility name
- Current payer shown
- Expected payer
- Correct payer contact name and email address, if known
I signed, but the SA still shows as pending
Another party may still need to act. Check whether the SA is waiting for the auditee, payer, or RBA countersignature.
I cannot upload the manually signed PDF
Confirm that:
- The document is in PDF format.
- The PDF is not password-protected.
- The PDF is not encrypted or locked.
- The required signatures or initials are complete.
- You are uploading the document to the correct assessment.
The agreement was revised
Review and complete the most recently issued version. Do not rely on a signature completed on an earlier version unless the VAP team confirms that the earlier agreement remains valid.
I need an invoice or payment details
Signing and payment are separate activities. Submit the question with the Audit ID, facility, payer organization, and a clear description of the invoice or payment assistance required so the request routes correctly.
Contacting the RBA Help Desk
Contact the RBA Help Desk if:
- You cannot locate the SA task.
- You cannot open the assessment or SA.
- The payer information appears incorrect.
- The facility, scope, cost, dates, or assessment firm appears incorrect.
- You cannot complete the electronic-signature process.
- A manually signed document will not upload.
- The SA workflow appears to be stuck.
- You are unsure which party needs to act next.
Information to include
To help the support team investigate efficiently, provide:
- Audit ID
- Facility name
- Your organization
- Your role: auditee, payer, requesting company, assessment firm, or other
- Current SA status, if visible
- Whether you selected electronic or manual signing
- A clear description of the problem
- A screenshot of the page or error message
- The date and approximate time the issue occurred
Example support request
I need assistance with the Scoping Agreement for Audit ID [Audit ID] and facility [facility name].
I am acting as the [auditee/payer/requesting company]. The current SA status is [status]. When I attempt to [open/sign/upload/submit] the agreement, [describe what happens].
I used the [electronic/manual] method and have attached a screenshot of the issue.
Email: help@responsiblebusiness.org
Frequently asked questions
Is the SA the same as Attachment C?
The SA is the workflow stage in RBA Online. Attachment C is the costing-approval document generally used when the auditee is paying for the assessment.
Why did I receive Attachment D?
Attachment D generally applies when an organization other than the auditee, such as a requesting company or another third party, is responsible for the assessment cost.
Can the auditee and payer be different organizations?
Yes. The organization receiving the assessment is not always the organization paying for it.
Why must the auditee act before the third-party payer?
In a third-party payer arrangement, the auditee may first need to confirm the proposed assessment information before the payer completes the applicable costing-approval signature.
Should the auditee sign the payer section?
Not unless the auditee is also the payer or has been specifically instructed to complete that section. For a third-party payer assessment, the auditee should complete only the applicable auditee confirmation.
Can I sign the SA electronically?
Yes. RBA Online supports electronic and manual signing methods. Use the option displayed for the applicable assessment.
Can I upload a password-protected PDF?
No. A manually signed PDF should remain unlocked so the countersignature can be completed.
Does signing confirm that payment has been received?
No. Signing confirms acceptance of the applicable assessment arrangements and costing information. Purchase-order, invoice, and payment activities may still remain.
What should I do if the SA information is incorrect?
Do not sign the agreement. Contact the RBA Help Desk or your applicable VAP contact and provide the Audit ID, the incorrect information, and the expected correction.
What if the SA was revised after I signed it?
A revised SA may replace an earlier agreement. Review the latest version and follow the updated signature instructions. Contact support if you are unsure which version is active.
Quick reference
| Question | Answer |
|---|---|
| What is the SA? | The Scoping Agreement confirms key contractual assessment arrangements. |
| When is it issued? | After contracting, scoping, bidding, and bid acceptance. |
| What is Attachment C? | The costing approval generally used when the auditee is the payer. |
| What is Attachment D? | The costing approval generally used when a third party is paying. |
| Can I sign electronically? | Yes. Electronic and manual signing options are available in the documented workflow. |
| Should a manually signed PDF be locked? | No. Keep the PDF unlocked for countersigning. |
| Does signing mean payment is complete? | No. Procurement, invoicing, and payment actions may still remain. |
Before submitting: Confirm that the agreement is current, all assessment and payer information is correct, you completed only the section assigned to your role, and any manually uploaded PDF remains unlocked.